Material
PLATE - Gunmetal / Brass
U BOLT - Copper / Copper Alloy / Stainless Steel
U Bolt - Rod Clamp
Nominal Rod Dia.
Hole Centres mm
Product Code
5/8”
37
AUU - 16
3/4”
37
AUU - 20
1”
37
AUU - 25
1.1/4”
43
AUU - 32
1.1/2”
54
AUU - 40
2”
64
AUU - 50
U Bolt - Rod To Tape Clamp
Nominal Rod Dia.
Tape Size mm
Product Code
5/8” / 16
25
AURT - 16
3/4" / 20
50
AURT - 20
1” / 25
50
AURT - 25
U Bolt - Rod To Cable Clamp - ‘GUV’
These are used for Connecting Rod to Cable. Available with different Rod & Cable size.
Nominal Rod Dia.
Conductor Range - mm2
Product Code
5/8” / 16
16 - 95
AURC - 1
3/4" / 20
16 - 70
AURC - 2
5/8” / 16
70 - 185
AURC - 3
5/8” / 20
70 - 150
AURC - 4
U Bolt - Rod To Cable Clamp - ‘SCE’
These are used for Connecting Rod to Cable. Available with different Rod & Cable size.
Nominal Rod Dia.
Conductor Range - mm2
Product Code
9.5
6 - 35
AUCC - 1
14
16 - 95
AUCC - 2
5/8”/16mm
16 - 95
AUCC - 3
3/4”/20mm
70 - 300
AUCC - 4
1”/25mm
70 - 185
AUCC - 5
U Bolt For Rigid Pipe & Cables - ‘PUB’
These U Bolts are used for universal parallel or 90 degree cable connection to rod or pipe.
Nominal Rod Dia.
Product Code
3/8”
APUB - 38
1/2”
APUB - 12
3/4”
APUB - 34
1 - 1/2”
APUB - 112
2”
APUB - 2
CROSS CLAMPS
Cross Clamp for Earth Tape / Earth Round Bar / Earth Round Bar & Tape
Type - HOT DIP GALVANISED STEEL
HDG Steel Cross Clamp equipped with 4 Galvanised Screws & Nuts M8 x 25, suitable to connect -
A) 8 mm or 10 mm Round Bars
B) Galvanised Plates with maximum width of 30 mm.
Type - Copper
Copper Cross Clamp equipped with4 Stainless Steel Screws & Nuts M8 x 25, suitable to connect :-
A) 8 mm or 10 mm Copper Round Bars
B) Copper Plates with Maximum width of 30 mm.
Sizes
Intermediate Plate
Material
60 x 60 x 2.5
with
Hot Galv. Steel
60 x 60 x 2.5
without
Hot Galv. Steel
60 x 60 x 2.5
with
Copper
60 x 60 x 2.5
without
Copper
Cross Clamp also available to connect Galv. Plate with 40 mm width.
Cross Clamp also available in size 60 x 60 x 3 / 60 x 60 x 4.
Cross Clamp also available of Stainless Steel on special request.